MULTI-SPLIT SYSTEM
Silent Comfort for
Any
Room Multiple Benefits
-
Individual Control
of up to 5 indoor units.
-
Easy Installation
on a balcony, veranda or roof, thanks to its compact design and construction.
-
Easy Maintenance
by adopting a self diagnosis function.
-
Save Space
because only one outdoor unit is needed.
-
Save Energy
thanks to the electronic expansion valves, optimum heat transfer and the highly efficient rotary compressor.
-
Centralized Control Board
Up to 5 indoor units can be switched on or off individually from a centralized control board, by merely fitting an additional PCB into each indoor unit.
-
Optimal Efficiency
Indoor unit should be selected in accordance with the operation time of each indoor unit as well as the maximum required cooling capacity during simultaneous operation. For example, the drawing below shows a private house or small shop with five rooms, in which the cooling capacity required in each room depends on the time of day. More cooling is naturally required in those rooms which are in use than those which do not require cooling. The table displays four operating cycles which could typically be operation in the course of a 24 hour period in this building. As can be seen, the cooling capacity of each indoor unit varies in accordance with the required usage. This means that the Multi-System always operates with optimal efficiency, no matter which combination operates.
MA 45 EV1
MA 56 EV1
.jpg)
.jpg)
Main Functions
